Thermostats for industrial use (non-hazardous areas)

Room thermostat heatTHERM-AT is used for temperature control and switching on or off of processes dependent on the ambient temperature.

Capillary thermostats heatTHERM-AT is used for temperature control and switching or expansion processes dependent on the surface temperature when the sensor is placed directly on the device.

IRM .... b capillary thermostat is designed for temperature sensing directly on the pipeline or on the surface of the heating cable, which is intended for installation in non-ex areas. An exceptional feature is the possibility of direct connection of the heating cable to the thermostat, where the use of a terminal box is no necessary. Switching capacity 25A.

Electronic switches GES10 series are designed for use on DIN rails in control systems functioning as thermostats or other two-state regulators.

The JUMO eTRON T100 is a compact, digital electronic thermostat with dimensions of 22.5mm x 93.5mm x 61.6mm, designed for simple temperature control (heating or cooling). It is mounted on a 35 x 7.5mm DIN rail. Temperature is measured using a resistance thermometer or a 0(4) to 20 mA current.