E 155 ... 160

Home

Electrical heater E155 .. 160 is designed for convection air heating in a box.

E155 .. 160 The convection heater consists of a reliable tubular heating element which is "sandwiched" between two extruded black anodized profiles of seawater-proof aluminium alloy..

1. Use

Heating of protection boxes and distributors located in safe area or the purpose of:

Frost protection
Condensation protection
Temperature maintenance

2. Advantages

High heat transfer capabilities due to the unique design of the black anodized aluminium fins
Elegant look
Integrated adjustable thermostat

3. Description

The convection heater consists of a reliable tubular heating element which is "sandwiched" between two extruded black anodized profiles of seawater-proof aluminium alloy. The thermostat housing is at the bottom of the heater. There is an adjustable thermostat and a control lamp in the air intake, which shows when the heater is on.

4. Technical parameters

	E155	E156	E158	E159	E160
Nominal power output	500 W	250 W	500 W	500 W	250 W
Nominal voltage	230 V AC	230 V AC	250 V AC	115 V AC	115 V AC
Adjustable range	5 ... 45 °C
Ingress protection	IP 20
Weight	1,7 kg

5. Installation and minimum clearances

The heater has to be installed with the fins vertical in order to allow free air convection. A space of 100 mm above and 50 mm beneath the heater should remain clear.

The mounting bracket can be installed by sliding the nuts on any fin of the vertical sides of the heater. We recommend to loosely assemble the sliding nuts to the mounting bracket first and then insert them between the desired fins.

5.1 Attached to the mounting rail in the INTERTEC instrument enclosure